[BUG] Can't boot ESP32 after #17381 #17384
Description
Description / Steps to reproduce the issue
Hi folks,
Seems the change on #17381 is causing the ESP32 to not boot anymore.
Issue can be easily seem on target and on QEMU:
$ qemurun esp32
Running QEMU for esp32...
Adding SPI flash device
ets Jul 29 2019 12:21:46
rst:0x1 (POWERON_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3ffb2080,len:7616
load:0x40080000,len:33660
entry 0x40082b58
*** Booting NuttX ***
I (713) boot: chip revision: v3.0
I (716) boot.esp32: SPI Speed : 40MHz
I (716) boot.esp32: SPI Mode : DIO
I (716) boot.esp32: SPI Flash Size : 4MB
I (723) boot: Enabling RNG early entropy source...
dram: lma 0x00001020 vma 0x3ffb2080 len 0x1dc0 (7616)
iram: lma 0x00002de8 vma 0x40080000 len 0x837c (33660)
padd: lma 0x0000b178 vma 0x00000000 len 0x4e80 (20096)
imap: lma 0x00010000 vma 0x400e0000 len 0x15aa8 (88744)
padd: lma 0x00025ab0 vma 0x00000000 len 0xa548 (42312)
dmap: lma 0x00030000 vma 0x3f410000 len 0x76e4 (30436)
total segments stored 6
ABI (613) cpu_start: Pro cpu start user code
I (614) cpu_start: cpu freq: 240000000 Hz
I (632) spi_flash: detected chip: gd
I (635) spi_flash: flash io: dio
D
Steps to replicate:
- Checkout
nuttx: 8f91054 - ./tools/configure.sh esp32-devkitc:nsh
- Enable CONFIG_DEBUG_FEATURES and CONFIG_DEBUG_ASSERTIONS
- make and flash
Can we take a look at this or revert the PR?
Thanks in advance!
On which OS does this issue occur?
[OS: Linux]
What is the version of your OS?
Mint 22
NuttX Version
master
Issue Architecture
[Arch: xtensa]
Issue Area
[Area: Kernel]
Host information
No response
Verification
- I have verified before submitting the report.